User Guide: Setup > Loan Setup > Loan Defaults
NLS Interface
|

Loan Defaults

The loan Defaults category contains default settings relating directly to the loans.

Accrual

Accrual Log This is the location/filename that will be generated by NLS during accrual to help debug the accrual problem. Only set the filename if you are experiencing an accrual problem. Once this value is set, the Accrual Thread value will be forced to 1.
Allow Future Accruals Allows the portfolio to be accrued through the weekend or weekend and holidays.

Warning

Nortridge discourages the use of this feature for it closes the day to all transactions. Before enabling, please contact Nortridge Customer Support for additional information.

ACH

ACH - Allow Backdating5.16+
Allows the user to specify an ACH start date prior to the current date. Disabled by default, the ACH start date must be on or after the current date. If enabled, the ACH start date can be set to any date after the loan’s origination date.
ACH – Effective Date Rule This option will allow the user to specify the effective date of an ACH payment based on the due date, post date, or the lesser of the two.
ACH – General Ledger Date Rule This option will allow the user to specify the general ledger date of an ACH payment based on the due date, post date, or the lesser of the two.
ACH – GL Date Min Rule This option allows the ACH GL date to have a minimum date.
ACH – Saturday Due Date Rule This option will modify the effective dates of pending transactions in NLS that fall on a Saturday to Friday, Saturday, Sunday, or Monday.
ACH – Sunday Due Date Rule This option will modify the effective dates of pending transactions in NLS that fall on a Sunday to Friday, Saturday, Sunday, or Monday.
5.5.1+Format
Enables support for either the ACH (NACHA format) automated payment system used in the United States or the AFT (CPA Standard 005 format) automated payment system used in Canada, or both.
5.6+Prenotifications
When enabled, an ACH prenotification occurs on the first ACH sent. A non monetary ACH is sent to validate the routing number and account number of the receiving bank or credit union.
5.6+Prenotifications Wait Period in Days
The number of days NLS is to wait for a prenotification response. Default is 3 days and can be set up to 14 days.
Return File Matching This option allows for control over how the NACHA return file is matched to the original ACH entry. Original trace ID will match with the originating trace ID whereas Loan Number, Date, and Amount will match with the specific returned details.

Bulk Payments

NLS 5.16 and later
Bulk Payment NSF Fee This option determines whether a NSF fee on a bulk payment is assessed on the first loan (from where the bulk payment was initiated) or to all loans included in the bulk payment.

Commitment

Commitment Distribution Order The order of the two-letter codes in this field determine the default distribution order for payments entered on a commitment or pool level. The two-letter codes are as follows:

OP = Oldest payments due
EV = Distribute among the loans evenly, excluding commitment/pool
PR = Distribute among the loans proportionally using the current principal balance to determine the ratio
OL = Oldest loan
CC = Current receivables that are attached directly to the commitment/pool
CP = Past due receivables that are attached directly to the commitment/pool
CO = Unbilled receivables that are attached directly to the commitment/pool
HL = From highest interest rate to the lowest interest rate
AA = Disable secondary sort
AB = Use oldest to newest setup date as secondary sort
AC = Use oldest to newest secondary sort

Display

Loan Dealer Field Display This option allows the user to define the data format displayed in the LoanView Dealer Field.
Loan Maximum Fetch Count This option will limit the number of loan records that can be retrieved from a query. The value of 0 denotes unlimited fetch count.
LoanView Interest Balance Option This option allows the user to choose truncation or rounding of the interest balances on the LoanView screen. This option does not affect the data, only the display of the data.
ParticipantView Interest Balance Option This option allows the user to choose truncation or rounding of the interest balances on the ParticipantView screen. This option does not affect the data, only the display of the data.
Set Loan Balance Precision to 5 Places This option allows the user to choose either 2 decimal places or 5 decimal places for the LoanView and ParticipantView balance fields. This option does not affect the data, only the display of the data.

Loan Group Transfers

Batch: Remove Loan from Status Code List Set this option to yes to prevent the loan from appearing in the status code list after it is successfully transferred to a new loan group.
Batch: Require From Loan Group to be the Same Set this option to yes to only allow loans belonging to the same loan group to be transferred.
Create GL Transfer Entries Set this option to yes to record the transfer into the Transfer GL placeholders.

General Ledger

GL Auto Cutoff Date By setting this value, NLS will allow the user to specify an automatic method for controlling the GL Minimum Date. This value is superseded by the use of the GL Minimum Date.
GL Interface Object Name GL Interface Object Name. This parameter is the custom general ledger interface dll file name. When a valid dll name (e.g. GLInterface.dll, quickbooks.dll) is specified, the system will load this custom interface into the processing section of NLS (a new GL Interface option will appear under Processing). For more information on this functionality please contact Nortridge Software.

NLS 5.9 and later

The path to the GL Interface object may be defined as a system environment variable. Open Control Panel > System > Advanced system settings and click Environment Variables…. Create a new variable under user variables with the variable name “nortridge” and the path to the DLL as the variable value.

GL Maximum Cutoff Date By setting this value, NLS will not allow the general ledger date to be set after this date. This effectively allows the user to force all general ledger entries to be posted in a specific accounting period.
GL Minimum Cutoff Date By setting this value, NLS will not allow the general ledger date to be set prior to this date. This effectively allows the user to close accounting periods.

Miscellaneous

Branch Option During Reversals5.16+
This option determines which branch a transaction reversal affects. When enabled (default), the reversal is posted from the branch that the original transaction was posted in. When disabled, the reversal is posted from the current user’s branch.
To display a dialog for selecting a branch location during transaction entry, make sure this option is enabled and the security for the user’s Cash Drawer > Cash drawer not required for payment reversals is granted.
Interest Rate Decimal Places This default defines how many decimal places are used in NLS when working with interest rates. The available options are for five or eight decimal places of precision on the annualized interest rate.
Recalc Balloon Payment Calculation of the balloon payment is an expensive process during the accrual run. The options are:
Continuous - This will re-calculate the balloon payment after every transaction
Last 3, 6, or 12 Months of Loan - This will re-calculate the balloon payment only during the last months of the loan and will greatly enhance performance.
Transaction Entry Batches This option allows the control of batches in Transaction Processing. There are three options: Disabled, Prompt for Batch, and Force Batch. If disabled, batches can not be used. Prompt for Batch will prompt the user to set up a batch before starting transaction entry but a batch is not required. The Force Batch option forces the user to use batches when entering transactions.
Voucher Check Printing Option This option will determine the options available to the user when processing vouchers. Print Check will allow the user to create a check whereas Print Report will only generate a report. Both options will mark the voucher as processed.

Multi Threading

Accrual Process Max Thread Count During accrual processing, NLS will spawn additional processing threads which will greatly increase the throughput of accruals. Depending on the server that this is executed on will determine the number of effective threads that can be used. Note of caution, more threads does not necessarily equate to better performance.
Credit Bureau Max Thread Count During processing of the credit bureau reporting, NLS will spawn additional processing threads which will greatly increase the speed of creating the Metro 2 file. The server that this is executed on will determine the number of effective threads that can be used. Note of caution, more threads does not necessarily equate to better performance.
Statement Process Max Thread Count During statement processing, NLS will spawn additional processing threads which will greatly increase the throughput of statements. Depending on the server that this is executed on will determine the number of effective threads that can be used. Note of caution, more threads does not necessarily equate to better performance.

Oracle Specific

Oracle Accruals Bulk Insert Buffer Size of buffer for bulk mode operation. When using this parameter bigger is not always better. Start with an initial value of 500 or 1,000 and work up from there. Valid range is 1 - 10,000. This parameter is ignored by databases other than Oracle.
Oracle Accruals Bulk Insert Mode Enable bulk insert mode operation during accrual processing. Turning this parameter on can greatly increase the speed of accruals on large systems. This parameter is ignored by databases other than Oracle.

Tree Control

Contact – Loan Relationship Tree Element 1 – Couple Element #1 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Couple type records.
Contact – Loan Relationship Tree Element 1 – Ind. Element #1 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Individual type records.
Contact – Loan Relationship Tree Element 1 – Org. Element #1 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Organization type records.
Contact – Loan Relationship Tree Element 2 – Couple Element #2 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Couple type records.
Contact – Loan Relationship Tree Element 2 – Ind. Element #2 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Individual type records.
Contact – Loan Relationship Tree Element 2 – Org. Element #2 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Organization type records.
Contact – Loan Relationship Tree Element 3 – Couple Element #3 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Couple type records.
Contact – Loan Relationship Tree Element 3 – Ind. Element #3 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Individual type records.
Contact – Loan Relationship . Tree Element 3 – Org. Element #3 of the Loan View Relationship Tree Control. By setting this value you can control the displayed contents of the Contact-Loan Relationship Tree Control for the Organization type records.
Loan Tree Control Element 1 Element #1 of the Loan View Tree Control. By setting this value you can control the displayed contents of the Loan Tree Control.
Loan Tree Control Element 2 Element #2 of the Loan View Tree Control. By setting this value you can control the displayed contents of the Loan Tree Control.
Loan Tree Control Element 3 Element #3 of the Loan View Tree Control. By setting this value you can control the displayed contents of the Loan Tree Control.

 



Updated: 2019.12.11


Fill out my online form.